Désolé, nous avons pas encore traduit cette page en français. Nous y travaillons.
6. Fitting sensor

Refit the radiator bottom hose. Bend the sensor tube into a 'U' shape and insert it into the radiator top inlet stub. Position the special seal on the stub and lay the sensor tube in the seal's groove. Position the hose and Jubilee clip over the seal and sensor tube and tighten the clip. Fill with coolant.

Il apparaît dans

Fitting an electric fan to a side radiator

Fitting an electric, thermostatically controlled fan in place of the mechanical, engine-driven t...