Désolé, nous avons pas encore traduit cette page en français. Nous y travaillons.
6. Fit thermal sensor

Drain the cooling system and remove the top hose at the radiator end. Straighten the end of the sensor tube and insert the sensor into the top hose. Place the special rubber seal on the radiator hose stub, then lay the straightened sensor tube on the seal. Fit the top hose over the seal and tube, and tighten the clip.

Il apparaît dans

Fitting an electric fan to a car

All cars have a fan to help cool the coolant as it passes through the radiator. On most cars,...