Désolé, nous avons pas encore traduit cette page en français. Nous y travaillons.
Numbering the plug leads Connector to distributor cap Chapeau dudistributeur Plug cap Use masking tape to tagand number plug leads.

Before you dismantle, wrap masking tape around each plug lead and write the cylinder number on it with a ballpoint pen.

Pull the leads off the plugs, disconnect the coil lead from the coil, unclip (or unscrew) the distributor cap and remove it with all the leads attached to it.

Replace the leads one at a time, to avoid confusion, with new leads of the right length.

Number each new plug lead as you install it.

Il apparaît dans

Fitting new high-tension leads

The high-tension leads from the coil to the distributor and from there to the plugs may start to...