Use insulating tape for binding soldered electrical joints; a waterproof plastic tape is best.

Apart from its normal use when painting panels, masking tape is also used to protect the bodywork when drilling.

Adhesive tape is one of many varieties of backing materials coated with an adhesive. Several types of adhesives can be used.

Read more on Wikipedia

Cet outil est utilisé dans

Checking hoses and the radiator cap

The parts of the cooling system most likely to give trouble are water hoses. Age and the movement...

Inspecting the ignition system

Inspect the ignition system whenever you make a general under-bonnet check. It takes only a coup...

Cleaning and checking the underside

Mud and dirty water thrown up by the wheels is the principal cause of body rust on cars. If the...

Adjusting and replacing window-winding mechanisms

There are three basic systems used to raise and lower car windows: mechanical linkage with sciss...

Replacing a master cylinder and servo unit

If a master cylinder is leaking replace it. The cylinder is usually mounted on the bulkhead sepa...

Checking headlamps and lights

It is an offence in law not to have all obligatory lights working. Check them frequently, especi...

Fitting a sunroof

Fitting a sunroof brings extra fresh air and light inside the car, making driving more of a plea...